Galvanised nails were used in this application, and as transom fastenings, in my part of the world, because they have better holding power than square cut copper boat nails. they were also quick to drive when dealing with a rapidly cooling steamed plank and would last the life of the boat.. The most successful of these for the wooden boat builder must be the silicon bronze ring-nail. the silicon bronze offers a high degree of corrosion resistance, it is without doubt the metal of choice for wooden boats fasteners. this combined with the rings or barbs give these nails a tenacious holding strength.. The ring shank boat nail has a series of serrated circles around the body of the nail. when these nails are driven into the wood, the rings tend to lock with the wood fibers, giving a positive grip that is hard to pull free, once driven, without destroying the surrounding wood fibers..
Cut nails for boat building. boat builders in the uk, eire, europe, scandinavia, s. e. asia, australasia and south america insist on using cut boat nails (or ship nails as they are sometimes known). each market has its own preferred shape of nail that usually reflects their traditional method of building the boat.. A treenail, also trenail, trennel, or trunnel, is a wooden peg, pin, or dowel used to fasten pieces of wood together, especially in timber frames, covered bridges, wooden shipbuilding and boat building.. Nails, pins, tacks. home / products tagged “nails, pins, pen-grip pin pusher ideal for use in pushing pins (small nails or brads) into wood. ideal for boat modelers and for model rail. comes with 100 brass finish 7mm pins. pin pusher w/100 brass pins (7mm) ppu8174g $ 19.87..
